http://ms.scmcnc.com
Home > Produk-produk > Mesin menumbuk > Sudut Punching Menandai Garis Ricih > TAPM1412S Angle Punching Marking Shearing Line

TAPM1412S Angle Punching Marking Shearing Line

    Harga seunit: USD 88000 / Set/Sets
    Jenis bayaran: L/C,T/T,D/P
    Incoterm: FOB,CFR,CIF,FCA
    Pesanan minimum: 1 Set/Sets
    Masa penghantaran: 30 Hari
Maklumat asas

Model No.: TAPM1412S

Model No.: TAPM1412S

Performance Classification: High-End CNC Machine Tools

Certification: GS, CE, RoHS, ISO 9001

Condition: New

Trademark: SCM

Transport Package: Sea Transport Packing

HS Code: 8501109101

Color: Optional

Additional Info

Pembungkusan: Kes Kayu

Produktiviti: 300/Y

Jenama: Sunrise CNC

Pengangkutan: Ocean

Tempat asal:  China

Keupayaan bekalan: 30set/Month

Sijil: GS, CE, RoHS, ISO 9001

Kod HS: 8459210000

Port: Qingdao

Penerangan produk

TAPM1412S Angle Steel Punching Menandai dan memotong jalur pengeluaran terutamanya digunakan dalam struktur keluli, menara sudut, jambatan dll.

Mod pemotongan bilah ganda dan mod memotong bilah tunggal boleh didapati, memilih oleh pelanggan, jurutera profesional akan mereka bentuk dan mengesyorkan model suitbale untuk anda.


1. Mengamalkan teknologi CNC, servo motor infeeding, dengan kecekapan yang tinggi, ketepatan bahan kerja yang stabil. Bahagian hidraulik, pneumatik dan elektrik utama yang diimport.
2. Terdapat tiga set punch dan mati di setiap sisi yang boleh memasang tiga jenis pukulan dengan diameter yang berbeza , boleh memproses semua lubang sekali kali .
3. Komputer dengan antara muka Cina / Inggeris, operasi mudah, dan boleh memaparkan lukisan benda kerja. Pengaturcaraan yang mudah, boleh pemrograman manual dan juga boleh menggunakan program yang dihasilkan oleh perisian lofting . Saya tidak dapat membaca fail NC.1 yang dihasilkan oleh perisian TEKLA.
4. Kereta kebal CNC didorong oleh servo motor. T dia fotoelektrik pengekod menyumbang maklumat itu. Kawalan gelung C untuk memastikan ketepatan kedudukan tinggi.
5. Akan menandakan, menumbuk dan ricih dalam kesempurnaan automatik, semua sudut siap boleh dibongkar oleh peranti perolehan pneumatik untuk meringankan kekuatan kerja.
6. Sistem kawalan terdiri daripada komputer hos, motor servo, PLC, sensor pemeriksaan luaran, dan sebagainya. Hanya masukkan dimensi bahan kerja, pemprosesan akan dibuat. F urthermore, program ini boleh disimpan, dipilih, dipaparkan dan disampaikan mengikut No. bahan kerja
7. Mar king unit mengadopsi kerangka tertutup dengan ketegaran yang baik. Empat kumpulan kotak aksara ditetapkan pada unit penanda yang boleh dipilih oleh program.
8. TAPM2020A adalah s ing le bilah ricih. T dia menumbuk, menandakan dan menyaring silinder lebih besar;
9. Dengan fungsi ricih yang dielakkan, untuk memproses sudut panjang tetap.
Processing precision (The allowable tolerance):
1. Two adjacent hole deviation of the same group ±0.5mm
2. Two not adjacent hole deviation of the same group ±0.7mm
3. Hole deviation of two adjacent group ±1mm
4. Stadia (Distance from central of hole to edge ) ±0.7mm
     
 
Installation Preparation
1. Installation time required for one set CNC angle line: 3-7 days.
1.1 The buyer should make ready foundation of machine according to the foundation drawing sent from our side. Please note, the foundation base plates for machine are not supplied by us. The buyer should make them according to drawing requirements.
1.2 Number 46# anti-wearing hydraulic oil, appx. 800L.
1.3 Oil filter is required before infuse oil into hydraulic oil tank.
1.4 Power supply and incoming line should be 50Hz, 380V, three phase. The coming line can be cable or lead wire of 3*102mm. And prepare earth wire of 62mm.
1.5 Air supply is required the air compressor also required for machine.
1.6 Leveling instrument (three legs type).
1.7 Frame level meter.
1.8 Five meter length tape measure.
1.9 Straight rule of 200mm.,
1.10 L-square.
1.11 Welding machine for spot weld foundation base plate.
1.12 Traveling crane or moveable forklift.
1.13 Hand drill.
1.14 Three people help to install machine.
2. Commissioning time required: 1-3 days.
2.1 Two operators, one maintainer. Arrange some people to accept training. They have to stay with our engineers during installation, commissioning and training.
2.2 Material for testing machine.
3. Training time required: 5 days.
It is better that the people who accept training can know computer and electrical knowledge.
Remark1:Water Cooling Device
If the temperature of oil is too high, density of the oil becomes smaller, and affecting normal operation of machine, and even causing oil leakage, so the oil need cooling device, the best way of cooling for oil is water cooling, client just need to weld one water tank (size about: 2x1.5x1.8m, this size just for reference, picture as below:), when you welded the water tank, buy one pump (Requirements of the pump: power more than 0.5KW, pump head 10m, if bigger it's better, picture for reference as below:)
   
Water Tank Water Pump
Remark2: Air Compressor Device
Our machine need air pressure, so in client's factory need the air compressor, for our machine requirements of air compressor: pressure 0.8Mpa, capacity 1m³, it's ok. Picture for reference as below
   
Remark3: We quote the price not include the Installation, Commissioning and Training.  
Normally, for angle line need two engineer(Electrical and Mechanical).The buyer shall provide round trip air tickets, suitable accommodation & Airport pickup (boarding, lodging and local transport) to seller's engineers during their service abroad. In addition, the buyer shall pay $50 USD extra per day per person to seller's engineer as technical service fees during their stay at buyer's factory.
Sudut Punching Machine


Sudut Punching Machine

Model TAPM1412S
Angle size (mm) 140*140*12
Max. Punching (dia. х thi.) (mm) Φ26х20
Punching force (kN) 1200
Marking force (kN) 1030
Shearing force (kN) 4300
Max. length of blank (m) 14
Max. length of finished (m) 14
Punches per side 3
Group of Marking letters 4
Dimension of letter (mm) 14×10×19 or 20×12×19
CNC axes 3
Shearing mode Single blade cutting
Feeding speed of angle (m/min) 60
Programming mode Lofting software or manual program
Overall dimensions (mm) ≈32000×7000×3000
Gross Weight of machine (kg) ≈18000
Total power (kW)

About 40


Kategori produk : Mesin menumbuk > Sudut Punching Menandai Garis Ricih

E-mel kepada pembekal ini
  • *Subjek:
  • *Mesej-mesej:
    Mesej anda mestilah antara watak-watak 20-8000
Berkomunikasi dengan pembekal?Pembekal
Melody Ms. Melody
Apa yang boleh saya lakukan untuk anda?
Hubungi pembekal